...

Johnson Screen Pipe

FITO Johnson screen pipe 01
Johnson Screen Pipe05
OD 25.4MM Johnson Screen Pipe
kinds of johnson screen pipe
Johnson Screen Pipe
Johnson Screen Pipe (3)
Johnson Screen Pipe (2)
Johnson Screen Pipe (1)
FITO Johnson screen pipe 01
Johnson Screen Pipe05
OD 25.4MM Johnson Screen Pipe
kinds of johnson screen pipe
Johnson Screen Pipe
Johnson Screen Pipe (3)
Johnson Screen Pipe (2)
Johnson Screen Pipe (1)

Johnson Screen, Wedge Wire Johnson Screen,Vee Wire Stainless Steel Screen,Johnson Screen Wedge Wire Tubes

Johnson Screen Pipe For Filteration is made by winding cold-rolled wire, approximately triangular in cross section, around a circular array of the longitudinal rods. The wire is attached to the rods by welding, producing rigid one-piece units having high strength characteristics at minimum weights.The wire is attached to the rods by welding, producing rigid one-piece units having high strength characteristics at minimum weights.There is a fixed value slot between each v wire, and the continuous slot, designed to provide maximum open are to reduce entrance velocity, increase hydraulic efficiency and promote more effective development.

Johnson Screen Pipe also be named Wedge wire screen mesh, Wedge Wire Screen For Pulp Filter, Johnson screen, include the wire Screen tube, wedge wire screen cylinder, wedge wire screen tube, Filter Candle, Drum screen, profile wire screen cylinder and so on.

  • The filter rating is 0.05mm-100mm.
  • Main material is AISI304, AISI316, AISI316L,Hastelloy etc.
  • Connectors and the ending according to client’s request
  • We also can produce the specific sizes according to clients’ request, design the screen according the usage.

Johnson Screen Pipe Characteristics:

  • Not easy to jam
    the special V shaped wire, make the hole of screen outside face is smaller than inside, so the hole is not easy to jam.
  • Slot even
    The CNC machine tools strictly control the gap between the wire, so that the gap is even.
  • Strong corrosion resistance
    Stainless steel 304 have the high corrosion resistance
  • Large flow rate: this kind of screen pipe has a relatively small resistance. Compared with the plastic filter element with similar overall size, it greatly increases its flow area, so under the same resistance, the flow rate increases. In other words, in the case of the same output, the number of filter elements can be reduced accordingly.
  • Adjustable gap: different users, using different filter equipment and filter media, have different requirements for the gap of the internal wire wound screen. Because the screen pipe is continuously welded on the equipment, the gap between stainless steel trapezoidal wires can be adjusted. In this way, it can meet the needs of different users without increasing the cost, and the plastic filter element needs to adjust the gap to make the mold again, so it is not easy to meet the needs of users. The small gap can reach 20 microns.

Johnson Screen Pipe Application:

  • Heavy oil, sand oil, light oil, SAGD, CBM, bitumen, thermal
  • Water injection, bi-modal sand, carbonates, thin pay
  • Horizontal, vertical , deviated oil and gas and water wells
FITO Johnson screen pipe 06

Custom range:

Johnson Screen pipe material: mainly stainless steel, carbon steel galvanized, carbon steel spray or other customer requirements material.
Gap: 0.1mm-15mm, arbitrarily selected screen size to meet different construction requirements.
Diameter: 2 ” 3 ” 4 ” 5 ” 6 ” 8 ” 10 ” 12 ” 14 ” 16 ” 20 “. 29 mm – 1000 mm.
Length: 2.9 M, 5.85 M. Up to 6 M.
Connection form: groove connection/weld ring connection or thread connection.

Related Products:

GET A FREE QUOTE NOW!

Contact Form Demo (#3)
Seraphinite AcceleratorOptimized by Seraphinite Accelerator
Turns on site high speed to be attractive for people and search engines.